Select Page
The 750 SDC self drilling eye lag screw is designed to go directly into 16 to 22 gauge sheet metal. The 750 SDC is the hundred pack version of the 750 SD. It is the only screw of it’s kind with an ICC-ES listing. Drill point to collar is about 3/4″, overall length is about 2″.

Pair with a Lagmaster® Pole Tool to hang ceiling wire or jack chain quickly and safely from the ground.

Designed for interior use and tension applications only.

Product Code: 750 SDC



  • ICC-ES Evaluation Report ESR-3135
  • Eco friendly RoHS compliant
  • American Recovery & Reinvestment Act compliant
  • Yellow zinc plated
  • Overall length is about 2″
  • Thread length is about 1/2″
  • Length from collar to drill point is about 3/4″
  • Thread size: 1/4″ – 14BSD
  • Hole is designed to accommodate 12 gauge ceiling wire
  • May be installed from the ground using a Lagmaster® pole tool
  • May be pre-tied to ceiling wire or jack chain
  • Packaged in boxes of 100 and master cartons of 1000 (counted by weight)
  • Box weight: 2 lbs.
  • Master carton weight: 20 lbs.
  • Pallet quantity: 100 boxes
  • QC testing performed at an A2LA ISO/IEC 17025 accredited Q-Lab


DSA IR A-5 Acceptance of products, Materials and Evaluation Reports For California DSA inspected jobs, See Section 3.3 on page 2 of DSA IR A-5 Acceptance of products, Materials and Evaluation Reports.
Pull-out tests per AISI S905-08 (Table 6) Note: Test results show ultimate loads (taken to failure). They do not include a safety factor.