45 Degree Angle Clip – 12 gauge – 100 Pack
The HOCL-45 is a medium duty 45 degree angle clip. This clip complies with California DSA IR 25-2 [see figure 4(B) on page 9]. Recommended for use with splayed bracing wire.
Product Code: HOCL-45C
PRODUCT SPECS
- Small hole is about 1/4″
- Large hole is about 3/8″
- Length of each leg is about 1″
- Width is about 1″
- Thickness is 12 gauge
- Zinc plated
- Recommended for indoor applications
- Sold in boxes of 100
- Box weight: 5 lbs.
DOCUMENTATION
INSTRUCTIONS
Seismic Bracing Installation Instructions
Required tools and fasteners: ODM, ODM375, ODM916, TE-12, Torque Wrench, 3/8” Wedge Anchor, HOCL-45 Angle Clip, ceiling wire.
Step 1. Drill a 3/8” hole into the concrete ceiling using an ODM (Overhead Drill Machine) fitted with an ODM375 3/8”x 3.325” HALT bit.
Step 2. Remove the ODM375 HALT bit and insert an ODM916 SDS Plus 9/16 ” socket adapter, set the hammer drill to hammer only.
Step 3. Insert a 3/8” wedge anchor with a HOCL-45 angle clip prettied to ceiling wire into the ODM916 socket adapter.
Step 4. Raise the ODM up to the hole and insert the wedge anchor using the hammer function of the hammer drill.
Step 5. Use a TE-12 extension pole equipped with a LMP 9/16 Hex Plug to tighten the 9/16” nut on the wedge anchor to the appropriate torque using a torque wrench (Usually 25 ft/lbs).
WHERE TO BUY
Related Products
