Beam Clamp – Flanges 1/8″ – 1/2″ Thick
The HOKFMP is our most versatile hammer-on spring steel clip. It provides a solid mounting point for 1/4 x 20 or #10-24 threads and has two built in slots to accept most drive ring sizes. Compare to Caddy’s® 2FMP28!
Product Code: HOKFMP
PRODUCT SPECS
- Requires only a hammer to install
- Accommodates standard 1/4 x 20 or #10-24 threaded and non threaded bridle rings
- Accommodates most drive ring sizes
- Supports drive rings or bridle rings on flanges from 1/8″ to 1/2″ thick (3.2 – 12.7 mm)
- GEOMET® finish
- 100 per box, 1000 per master carton
- 5 lbs. per box, 50 lbs. per master carton
DOCUMENTATION